AT&T EL42308, EL42208, EL42258 user manual Message counter displays

ANNC. RECORD

Message counter.

Answering system

Message counter displays

When the answering system is idle, the message counter displays the total number of answering system messages. See the list below for explanations of other displays in this counter.

Message counter displays

0	No messages.
0 (flashing)	The clock needs to be set (page 34).
1-95	Total number of messages and memos,
	or message number currently playing.
1-95(flashing)	Total number of messages and memos.
	The number flashes when there are new
	(unreviewed) messages.
	If the telephone loses power, after power
	is restored, the number in the message
	counter will flash (even if you have only
	old messages) to indicate the clock
	needs to be set.
10-99	Current remote access code while setting
	(page 36).
1-99(counting)	Elapsed time while recording a memo
	(page 38) or announcement up to 90
	seconds (page 35).
99 (flashing)	Memo recording time has exceeded
	the maximum counter capacity of 99
	seconds.
F (flashing)	Memory is full. Messages must be deleted
	before new messages can be received.
--	System is answering a call, being
	accessed remotely, or the clock is being
	set, or a handset is on a call.
--(flashing)	System is being setup or initialized.
2, 4, 6, tS	Current number of rings-to-answer while
	setting this feature (page 36).
1-8	Displayed for two seconds while
	telephone base speaker volume is being
	adjusted.
HI, LO, OF	Displayed for two seconds while
	telephone base ringer volume is being
	adjusted.

39