1. Dial your telephone number from any touch- tone telephone.
2. When the system answers,
enter two digit remote access code (19 unless you have changed it).
3. Enter remote commands (see list at right).
4. Hang up to end the call and save all undeleted messages.
NOTE: If you pause for more than four seconds during remote access, you will hear a help menu listing all features and commands. If there is no command entered for another 15 seconds, the call will end automatically.
Answering system
Remote access
A two digit security code is required to access your answering system from any
Play all messages | Press to hear all messages. | |
1 |
| |
Play new messages | Press to hear new messages. | |
2 |
| |
Delete the message | Press once during playback to | |
3 | delete current message. Press | |
33 | twice to delete all old messages. | |
| ||
Repeat or go back | Press during the caller’s | |
4 | message to repeat the message. | |
| Press during the beginning of | |
| the day and time announcement | |
| to go back to the previous | |
| message. | |
|
| |
Stop | Press to stop any operation (stop | |
5 | playback, stop recording). | |
|
| |
Skip to next message | Press to skip the current | |
6 | message and advance to next | |
| message. | |
|
| |
Record announcement | Press *7, wait for the beep, then | |
*7 to begin recording | begin speaking. Press 5 to stop | |
recording and hear the playback | ||
5 to stop recording | ||
of new announcement. | ||
| ||
|
| |
Help menu | Press to hear list of features & | |
*5 | commands. | |
| ||
|
| |
Turn system off | Press to turn off answering | |
0 | system. Incoming calls will no | |
| longer be answered. | |
|
| |
Turn system on | If off, system will answer after | |
0 | 10 rings. Enter your access | |
| code, then press 0 to turn the | |
| answering system on. | |
|
| |
Exit | Press 8 or hang up to end the | |
8 | remote access call. | |
|
|
41
