AT&T EL52501 user manual Key tone, Set date/time

Models: EL52501

1 83
Download 83 pages 27.25 Kb
Page 18
Image 18

Telephone settings

Handset settings

Key tone

The handset is programmed to beep with each key press. You can turn the key tone off, so there are no beeps when you press keys.

1.Press menu/select in idle mode to enter the main menu.

2.Press CID or DIR to scroll to >Settings, then press menu/select.

3.Press CID or DIR to scroll to >Key tone, then press menu/select.

4.Press CID or DIR to select >on or >off.

5.Press menu/select to save your preference.

Set date/time

CLR VOICEMAIL >KEY TONE

KEY TONE >ON

The answering system announces the day of the week and time of each message received prior to playing it. If you subscribe to caller ID service, the day, month and time are set automatically with each incoming call (see About caller ID on page 33). However, the year must be set so that the day of the week can be calculated from the caller ID information.

Follow the steps below to set the month, date, year and time.

1.Press menu/select in idle mode to enter the main menu.

2.Press CID or DIR to scroll to >Settings, then press menu/select.

3.Press CID or DIR to scroll to >Set date/time, and then press menu/select.

KEY TONE >SET DATE/TIME

4.Press CID or DIR to select the month, then press

menu/select, or enter the 2-digit number (01-12) using the dialing keys (0-9).

5.Press CID or DIR to select the day, then press

menu/select, or enter the 2-digit number (01-31) using the dialing keys (0-9).

6.Press CID or DIR to select the year, or enter the

2-digit number (00-99) using the dialing keys (0-9), then press menu/select.

7.Press CID or DIR to select the hour, then press

menu/select, or enter the 2-digit number (01-12) using the dialing keys (0-9).

8.Press CID or DIR to select the minute, or enter the t2- digit number (00-59) using the dialing keys (0-9), then press menu/select.

SET DATE 11/20/10

SET TIME 10:30 PM

9.Press DIR or 2 to choose am, or press CID or 7 to choose pm. Press menu/select to save. A confirmation tone sounds.

note: If the date and time is not set when the message is recorded, the system announces “Time and date not set” before it plays the message.

13

Page 18
Image 18
AT&T EL52501 user manual Key tone, Set date/time