53

Answering system
Remote access

Hang up to end the call and save all messages.

There is a wallet card listing the remote commands at the back of this user’s

manuals. Cut it out and keep it in your wallet for quick reference.

notes:
If you do not enter a valid remote access code, there is no response until the correct code
is entered.
If the date and time are not set when a message is recorded, the system announces, “Time
and date not set” before the answering system announces the number of messages.
If there are no messages in the answering system, the system announces, “You have
no message.”
If there are no new messages in the answering system and you press 2 to play new
messages, the system announces, “You have no new message.”
Once the messages have played, the telephone announces the help menu options. If you do
not press any key with 20 seconds, the remote access call ends automatically.
If the memory is full, the answering system answers after 10 rings and announces, “Memory
is full. Enter the remote access code.” Enter your remote access code to access the messages
and announcements.
When the answering system is turned off, the telephone answers after 10 rings, and
announces, “Please enter your remote access code.”

5.

•
•
•
•
•
•
•