®
USER’S GUIDE
network management card
8
Control Console

How To Log On

Overview
You can use either a local (serial) connection, or a remote (Telnet)
connection with a computer on the Management Card’s subnet to access
the control console.
Use case-sensitive User Name and Password entries to log in (by default,
apc and apc, for an Administrator, or device and apc, for a Device
Manager).

Remote access to the control console

You can use Telnet to log into the control console from any computer on the
same subnet as the Management Card.
1. At a command prompt, type telnet and the Management Card’s
System IP address, and then press ENTER. For example:
telnet 139.225.6.133
2. Enter your User Name and Password.
If you cannot remember your User Name or Password, see
How to Recover from a Lost Password.