AT&T partner plus communications system manual Form D2 Telephone Programming Blank Templates

AT&T	Form D2: Telephone Programming (Blank Templates)
MLS-34D PHONES:	MLS-12 and MLS-12D PHONES:

	Assign to exts.:
	Auto. Line Sel.:
	Factory setting is “Outside lines 1, 2, 3, 4, 5, 6, 7, 8; Intercom”
	Assign to exts.:
Assign to exts.:	Auto. Line Sel.:
Auto. Line Sel.:	Factory setting is “Outside lines 1, 2, 3, 4, 5, 6, 7, 8; Intercom”
	Factory setting is “Outside lines 1, 2, 3, 4, 5, 6, 7, 8; Intercom”

MLS-6 and MLC-6 PHONES: NOTE: An MLS-6 or MLC-6 phone with 4 lines assigned to it has no programmable buttons.

Assign to exts.:

Auto. Line Sel.:

Factory setting is “Outside lines 1, 2, 3, 4, 5, 6, 7, 8; Intercom”

NOTE: Line buttons are programmable only if they are not used for lines.

Summary of Abbreviations

DND	= Do Not Disturb
PRIV	= Privacy
EXHOLD	= Exclusive Hold
DROP	= Conference Drop
RECALL	= Recall

Button with lights required

LNR	= Last Number Redial	GRP-CALL
SNR	= Save Number Redial	GRP-PAGE
MSG-ON	= Message Light On	LOUDSPK
MSF-OFF	= Message Light Off	PICKUP-GRP
TT-EN	= Touch-Tone Enable	PICKUP-(x)

Button with lights recommended (but not required)

=Group Call

=Group Page

=Loudspeaker Page

=Call Pickup Group-Answer

=Pickup Extension

where (x)=extension number [example: PICKUP-11]

FAX-(x)

EXT-(x)

PAGE-(x)

AUTO

= Fax Management Extension

where (x)=fax extension [example: FAX-11]

= Auto Dial (Ring)—Ext.

where (x)=ext. [example: EXT-10]

= Auto Dial (Page)—Ext.

where (x)=ext. [example: PAGE-10]

= Auto Dial—Outside Number

Put telephone number or name on template [example: John]