AT&T partner plus communications system Form D1 Telephone Programming Standard Templates, Example

AT&T

Form D1: Telephone Programming (Standard Templates)

MLS-34D Telephone

Template 1* (Ext. 10)

●Intercom Auto Dial Numbers

●Group Paging

●Night Service On/Off

●Loudspeaker Paging

●Fax Management

(indicate fax machine extension)

●Message Light On

●Message Light Off

NOTE: This standard template is recommended for extension 10, typically the receptionist’s extension.

Unused line buttons are programmable

	Auto. Line Sel.:	Example
	Factory setting is “Outside lines 1, 2, 3, 4, 5, 6, 7, 8; Intercom”	To assign the template to Exts. 11, 12, 15, and 16 (exts. 11 and
	MLS-12 or MLS-12D Telephone	12 to have factory-set Automatic Line Selection, exts. 15 and 16
Template 2*		to be programmed to select the Intercom first, followed by
		outside lines 2, 1, and 4):
● Outside Auto Dial Numbers
		Assign to exts.:
● Do Not Disturb
● Privacy		Auto. Line Sel.:
● Save Number Redial
● Last Number Redial

Unused line buttons are programmable

Assign to exts.:

Auto. Line Sel.:

Factory setting is “Outside lines 1, 2, 3, 4, 5, 6, 7, 8; Intercom”

Assign to exts.:

Auto. Line Sel.:

Factory setting is “Outside lines 1, 2, 3, 4, 5, 6, 7, 8; Intercom”

✱Descriptions of these and other programmable features (with suggested abbreviations) are on the reverse side of this form.