AT&T SL82208, SL82308, SL82408 user manual Not set

Appendix

Troubleshooting

System announc- • You need to reset the answering system clock (see page 33). es “Time and day

not set”

System does not respond to remote commands

•Make sure to enter your remote access code correctly (see page 40).

•Make sure you are calling from a touch-tone phone. When you dial a number, you should hear tones. If you hear clicks, the phone is not a touch-tone telephone and cannot acti- vate the answering system.

•The answering system may not detect the remote access code while your announcement is playing. Try waiting until the announcement is over before entering the code.

•There may be noise or interference on the phone line you are using. Press dial pad keys firmly.

System does not record message

•Make sure answering system is on (see page 39).

•Make sure the memory of the answering system is not full.

Outgoing	•	When you record your announcement, make sure you speak in a
announcement is		normal tone of voice, about nine inches from the telephone
not clear		base.
	•	Make sure there is no background noise (TV, music, etc.) while
		you are recording.

51