AT&T user manual Intercom, Model SL82208, Models SL82308/SL82408, To end the intercom call

Telephone operation

Intercom

Use the intercom feature for conversation between handsets.

Model SL82208

1.Press INT. The screen will show CALLING OTHER HANDSET. The destination handset will ring, and its screen will show OTHER HANDSET IS CALLING.

2.On the ringing destination handset, press

PHONE/FLASH, INT, SPEAKER, or any dial pad key (0-9, * or #) to answer the intercom call.

Models SL82308/SL82408

1.Press INT. The screen of the originating handset will show INTERCOM TO:.

2.Enter the handset number of the destination hand- set. The display will show CALLING HANDSET X. The destination handset will ring, and its screen will show HANDSET X IS CALLING.

3.On the ringing destination handset, press

PHONE/FLASH, INT, SPEAKER, or any dial pad key (0-9, * or #) to answer the intercom call.

NOTES:

1.Before the intercom call is answered, you can cancel the intercom call by pressing OFF/CLEAR or INT on the originating handset.

2.If the destination handset is not answered within 100 seconds or if it is in the directory or call log mode, or out of range, the originating handset will show the message UNABLE TO CALL TRY AGAIN.

3.Pressing OFF/CLEAR or MUTE/DELETE will temporarily silence the intercom ringer.

To end the intercom call:

•Press OFF/CLEAR or INT on either handset.

-OR-

•Place either handset in the charger or telephone base.

14