Getting started
Battery installation & charging
Install the battery as shown below. After installing the battery, you can make and receive short calls. For optimal performance, charge the handset battery for at least 16 hours before use. When fully charged, the handset battery provides approximately five hours of talk time and three days of standby time.
Step 1 | Step 2 | Step 3 | |
Plug the battery securely | Place the battery | Align the cover flat | |
into the plug inside | pack and wires | against the battery | |
the handset battery | inside the | compartment | |
compartment, matching | compartment. | cover, then slide | |
the |
|
| it upwards until it |
|
|
| clicks into place |
|
|
|
|
|
|
|
|
Step 4
Charge the handset, by placing the handset face up in the telephone base or in the additional charger. The CHARGE light will be on when charging.
IMPORTANT INFORMATION
1.Use only the supplied rechargeable battery or replacement battery (model BT8001). To order, visit
our website at www.telephones.att.com or call 1 (800)
2.See the Troubleshooting section on page 44 for charging issues.
