Answering system
NOTE: To adjust the voice prompt volume, press VOLUME 
.
Answering system setup
You can change the number of rings, telephone base ringer volume, remote access code and message alert tone.
1.When the phone is idle, press SETUP repeatedly to hear the feature settings.
2.When you hear the feature you want to
change, press 
SKIP or 
REPEAT to change the setting.
•Number of rings - set the number of rings before the answering system answers an incoming call.
•Base ringer - set the volume of the telephone base ringer.
•Remote access code - change the code required to access your answering system from another telephone.
•Message alert tone - set the message alert tone to On so that it will beep when you have a new answering system message.
3.Press SETUP to save your selection and move to the next menu option.
Press 
PLAY/STOP to save your selection and exit the menu.
46
