ENGLISH

PAIRING

NOKIA 3650, 3660, 3600, N-GAGE, 6600 and SIEMENS SX1

When you switch on for the first time or when you perform a new installation, you need to pair your telephone and your TT01. Once this is done, connection between your telephone and your hands-free kit will take place automatically as soon as the two devices are less than a few meters apart. A 'beep' will be heard, indicating that connection is established.

IMPORTANT : The hands free kit is only operative when the car ignition is on (IGN)

Procedure :

Switch on the telephone; turn on the ignition, the blue led shows that the hands free kit is supplied. Perform the following sequence on the telephone. The first time you will hear the instruction ”PLEASE PAIR DEVICE”, otherwise reset the TT01 by pressing and holding the red/green buttons at the same time.

From your phone, display the main menu, select the CONNECTIVITY icon and press “Options”. Select “Open”, check that BLUETOOTH® is ON, select PAIRED DEVICES and go to OPTIONS.

Select NEW PAIRED DEVICE, then select «more devices » (if more than one device is paired to the telepho ne), search. Press STOP, then select «TT01 CK3.xx», please wait.

Enter code 1234 and confirm.

After the 'beep', accept the connection request by pressing YES.

Check that the red and green lights of the buttons come on and off according to the position of the ignition key. You should hear the « Please pair device » instruction for the first time. If not, reset your CK3000 by pressing the green and the red buttons at the same time.

When you enter your vehicle and turn on the ignition, your telephone asks for permission to establish a Bluetooth® connection with the TT01.

You can also eliminate the need to grant permission by following the steps below: Call up the BLUETOOTH® menu, then select LINKED EQUIPMENT.

Select «TT01 CK3.xx» then choose OPTIONS, Then select the DEF. AS AUTHORIZED option.

USING PHONE-SPECIFIC FEATURES

NOKIA/SIEMENS

The telephone allows to manage TT01 settings from the accessories menu, please also refer to the “stan dard features” section .

Managing Dual Calls:

A warning tone will alert you if someone is trying to get through while you are engaged on another phone call.

Press green button once to communicate with a new caller.

Press green button once to return to your first caller.

To end the present communication, press red button once.

Discreet mode (PRIVATE):

Press the green button briefly to switch the conversation to hands-free or handset mode.

To redial last number called (REPEAT):

Press and hold the TT01’s green button.

Auto Answer:

From your phone, display the main menu, select the TOOLS icon, then select: PARAMETERS for Nokia 3650, 3600, 6600 and Siemens SX1 telephones. TOOLS for Nokia N-GAGE telephones.

Select “Settings”, then “Accessories” and finally s elect “Hands free”.

Select AUTOMATIC ANSWER, select OPTIONS, select CHANGE, select ON, press OK.

NOTE: ensure BLUETOOTH® connection is on.

6

Page 10
Image 10
AT&T TT01 Nokia 3650, 3660, 3600, N-GAGE, 6600 and Siemens SX1, Using PHONE-SPECIFIC Features NOKIA/SIEMENS, Auto Answer