AT&T TT01 manual English Pairing Siemens S55, S56, Communicating Siemens

ENGLISH
PAIRING	SIEMENS S55, S56

When you switch on for the first time or when you perform a new installation, you need to pair your telephone and your TT01. Once this is done, connection between your telephone and your hands-free kit will take place automatically as soon as the two devices are less than a few meters apart. A 'beep' will be heard, indicating that connection is established.

IMPORTANT : The hands free kit is only operative when the car ignition is on (IGN)

Procedure :

Switch on the telephone; turn on the ignition, the blue led shows that the hands free kit is supplied. Perform the following sequence on the telephone. The first time you will hear the instruction ”PLEASE PAIR DEVICE”, otherwise reset the TT01 by pressing and holding the red/green buttons at the same time.

Go to Menu, ► Settings and confirm with “Select”. ▼ “Mod/Data”, confirm with "Select", ▼ “Bluetooth®”, and click on “Options”. If Bluetooth® is activated, “BT activated” is displayed. If Bluetooth® is deactivated, “Activate BT” is displayed. “Select” to activate this function. ▼ Search and confirm with “Access”. Wait until:

“1 Found”, followed by «TT01 CK3.xx» are displayed,	confirm with “Select”.
«Enter BT Pin for TT01 CK3.xx » is displayed, enter	1234, press “OK”
«Hands-free trusted» is displayed to indicate that the pairing has been completed successfully.
COMMUNICATING	SIEMENS

The TT01’s green and red buttons are the main devices to make and receive calls.

IMPORTANT: the Siemens S55 model allows you to use the TT01’s voice recognition feature coupled to the phone book (see section “MEMORIZATION of VOICE TAGS”).

Answering calls:

∙Press the TT01’s green button to pick-up the incoming call.

∙Press the TT01’s red button to hang up.

Make a call in TOUCH & TALK mode:

∙Briefly press the green button, wait for the tone, then say the name of the person you want to call. E.g.: press green button, [beep], John..

∙Press the red button to hang up.

Please refer to “MEMORIZATION of VOICE TAGS” section for name voice recognition.

Making a call manually:

∙Use the phone keypad to dial the number. Press the TT01 green button to switch to hands-free mode.

Managing Dual Calls:

∙A warning tone will alert you if someone is trying to get through while you are engaged on another phone call. There are two possible options:

∙1)Press green button once to communicate with the new caller. This button then allows you to switch between calls. Press the red button once to hang up both calls.

∙2)Press red button once to end the first call. The second call ringing tone is heard from the speakers, press the green button to answer it.

Discreet mode (PRIVATE):

∙Press the green button briefly to switch the conversation to hands-free or handset mode.

To redial last number called (REPEAT):

∙Press and hold the TT01’s green button.

Clearing memory (RESET) :

∙Use the TT01’s buttons. Press and hold the green and red buttons at the same time.

Adjusting the volume:

∙Use the keys on the handset to adjust the volume of the conversation.

WARNING: clearing the memory requires a new pairing phase.

8