ENGLISH

TT01 MENU: Communucating

Sony Ericsson

IMPORTANT : the functions listed below are an evolution of the base ones. Therefore, all the functions described in the “COMMUNICATING (base)” section can still be used. If the TT01’s own voice recognition feature is used the voice tags memorised in the telephone can no longer be used.

Answering calls:

Say: «Telephone» to accept the call.

Say: «Hang up» to hang up at the end of a call or t o reject a call.

Making a call manually:

To do so, Wordspotting must be enabled (see “TT01 MENU: Settings” section)

Say: «Telephone», wait for the tone and say the nam e associated to the number you wish to call. Example : " Telephone, {beep}, John ".

If there are several numbers stored in memory for the same name (visiting card or V-card), the call, using voice recognition, will be placed in the following manner:

Say: "Telephone", wait for the beep, and pronounce the name associated to the number you wish to call. TT01 repeats the name, and then emits a beep; you must then indicate the number to be dialed, "Home", "Work" or "Cellular".

You must wait for a beep after every word.

Example: "Telephone, {beep}, John, {beep}, cellular".

To end the call, say “Hang up”

PAIRING

Sony Ericsson P800, P900

When you switch on for the first time or when you perform a new installation, you need to pair your telephone and your TT01. Once this is done, connection between your telephone and your hands-free kit will take place automatically as soon as the two devices are less than a few meters apart. A 'beep' will be heard, indicating that connection is established.

IMPORTANT : The hands free kit is only operative when the car ignition is on (IGN)

Procedure :

Switch on the telephone; turn on the ignition, the blue led shows that the hands free kit is supplied. Perform the following sequence on the telephone. The first time you will hear the instruction ”PLEASE PAIR DEVICE”, otherwise reset the TT01 by pressing and holding the red/green buttons at the same time.

Flip the telephone open, select “CONTROL PANEL”, then select “CONNECTION”. After that select the “BLUE TOOTH®” icon, select “SETTINGS”, “OPERATIVE MODE” must be o n, select “ADD” (the telephone starts searching). Select the TT01 icon (connection in progress)

Insert the 1234 code as password and select “DONE”.

The TT01 is displayed on the list of Bluetooth devices, press “DONE”.

After pairing, wait for the “BEEP” before making a call

USING PHONE-SPECIFIC FEATURES

Sony Ericsson

The telephone provides TT01 settings management from its accessories menu.

Auto Answer:

From your phone, open the lid and select the “PHONE” shortcut in the “closed flip connections” window.

Click the EDIT option and choose PREFERENCES.

Click HANDS FREE and select AFTER 5 SECONDS from ANSWERING MODE list.

Escape by clicking DONE several times.

13

Page 17
Image 17
AT&T manual TT01 Menu Communucating Sony Ericsson, Sony Ericsson P800, P900, Using PHONE-SPECIFIC Features