AT&T TT01 manual Memorization of Voice Tagspanasonic, Pairingmotorola V500, V525

ENGLISH

Discreet mode (PRIVATE):

∙Press the green button briefly to switch the conversation to hands-free or handset mode.

To redial last number called (REPEAT):

∙ Press and hold the TT01’s green button.

Clearing memory (RESET) :

∙ Use the TT01’s buttons. Press and hold the green and red buttons at the same time.

Adjusting the volume:

∙ Use the keys on the handset to adjust the volume of the conversation.

WARNING: clearing the memory requires a new pairing phase.

MEMORIZATION OF VOICE TAGSPANASONIC

Your telephone allows you to associate voice tags to the names in the phone book. With the TT01, it is possible to use this feature to recall names from the phone book by pressing the green button and repeating the name after the tone “beep”.

Procedure :

To use voice tags associated to names, you must activate voice recognition first.

To do so, enter the menu and select «Contacts list» . Choose «Options» then «Enable/Disable». If it has n’t been done before, select «On».

To assign a voice tag to a name, enter the menu and select «Contacts list».

Enter the «Voice numbering» menu. Press «Menu», the n «Add». Select the desired name and click on «Menu » then

«Recall». The following message is displayed: «Reco	rd your voice».
Then press «OK». «Voice numbering recorded» is disp	layed. Say the name. «Please record your voice agai n» is displayed.

Then press «OK».

«Voice numbering recorded» is displayed. Say the na me again. «Validated voice numbering» to indicate t hat the tag has been recorded. Otherwise the telephone will ask you to record your voice again.

To eliminate a voice tag associated to a name, access the «Contacts list » menu then «Voice numbering» Select the desired name and click on «Menu».

Select «read», you can listen to the voice tag you have recorded. You can delete it by selecting «Delete».

PAIRINGMOTOROLA V500, V525, V600

When you switch on for the first time or when you perform a new installation, you need to pair your telephone and your TT01. Once this is done, connection between your telephone and your hands-free kit will take place automatically as soon as the two devices are less than a few meters apart. A 'beep' will be heard, indicating that connection is established.

IMPORTANT : The hands free kit is only operative when the car ignition is on (IGN)

Procedure :

Switch on the telephone; turn on the ignition, the blue led shows that the hands free kit is supplied. Perform the following sequence on the telephone. The first time you will hear the instruction ”PLEASE PAIR DEVICE”, otherwise reset the TT01 by pressing and holding the red/green buttons at the same time.

Call up the “Configuration” menu then select “Conne ction”. Choose “Bluetooth® Link”, then “Hands-free”.

Now you need to search for your kit. Choose “Find Equipment” and wait. «TT01 CK3.xx». Answer Yes when prompted “Do you want to couple your telephone and your kit?”. Enter 1234 in the Bluetooth® password entry screen and validate it.

16