Specifications
Handset Standards | WCDMA: 850 MHz, 1900 MHz, and 2100 MHz |
| GSM: 850 MHz, 900 MHz, 1800 MHz, and 1900 MHz |
|
|
Dimensions (H×W×D) | 4.49" (H) x 2.4" (W) x 0.41" (D) |
Weight | 3.34 oz. (with battery) |
Display | 2.4" 262K TFT color screen |
Camera | 2.0 megapixels, supports images up to 1600 x 1200 pixels |
|
|
Video capture | Up to 15fps (QVGA) |
|
|
Extended memory | 32 GB microSD card |
|
|
Battery | 1,000 mAh, |
|
|
Features | MMS Video and Picture, Email, Calendar, Speakerphone, |
| Voice Recorder, Bluetooth |
Supported file types | Image: GIF, JPEG, PNG, BMP, Animated GIF, WBMP |
| Video: MP4 |
| Audio: MP3, AMR, WAV, ACC, ACC+, MIDI |
|
|
Continuous idle time | Up to 12 days and 12 hours |
|
|
Continuous talk time | Approximately 4.5 hours |
|
|
Charge time | Approximately 3 hours |
|
|
Miscellaneous | USB 2.0; JAVA MIDP 2.1 |
|
|
Note: Talk time and idle time are based on ideal working environments. Use of certain phone functions and network conditions can reduce battery life and talk/ idle time.
FCC Compliance
This mobile phone complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.
This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
• Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
• The antenna(s) used for this transmitter must not be
64 | Specifications | FCC Compliance | 65 |
