Chapter 2

Hardware Setup

Before you Begin

1. Important safety information regarding the placement of this device is provided on page 47. Please review it before proceeding.

2.Make sure that power to all the devices you will be connecting up have been turned off. You must unplug the power cords of any computers that have the Keyboard Power On function.

Standard Rack Mounting

A standard rack mounting kit is provided with your CL1008 / CL1016. The kit enables the switch to be mounted in rack with a depth of 42.0–82.0 cm.

L Brackets

Side Mountng

Brackets

Note: 1. It takes two people to mount the switch: one to hold it in place, the other to screw it in.

2.The standard rack mounting kit does not include screws or cage nuts. If you need additional screws or cage nuts, contact your rack dealer.

3.Optional mounting kits – including single person Easy Installation kits – are available with a separate purchase. See Optional Rack Mounting, p. 56 for details.

7