Chapter 4. OSD Operation
(Continued from previous page.)
Setting | Function |
|
|
PORT ID | Selects how the port ID is displayed: the port number alone (PORT |
DISPLAY | NUMBER); the port name alone (PORT NAME); or the port |
MODE | number plus the port name (PORT NUMBER + PORT NAME). The |
| default is PORT NUMBER + PORT NAME). |
|
|
SCAN | Determines how long the focus dwells on each port as it cycles |
DURATION | through the selected ports in Auto Scan mode (see F7 SCAN, |
| page 33). Key in a value from |
| Default is 5 seconds; a setting of 0 disables the scan function. |
|
|
SCAN/SKIP | Selects which computers will be accessed under Skip mode (see |
MODE | F5 SKP, page 31), and Auto Scan mode (see F7 SCAN, page 33). |
| Choices are: |
| ALL – All the ports which have been set accessible (see SET |
| ACCESSIBLE PORTS, page 30); |
| QUICK VIEW – Only those ports which have been set accessible |
| and have been selected as quick view ports (see SET QUICK |
| VIEW PORTS, page 30); |
| POWERED ON – Only those ports which have been set accessible |
| and are powered on; |
| QUICK VIEW + POWERED ON – Only those ports which have |
| been set accessible and have been selected as quick view ports |
| and are powered on. The default is ALL. |
|
|
SCREEN | If there is no input from the console for the amount of time set with |
BLANKER | this function, the screen is blanked. Key in a value from |
| |
| function. The default is 0 (disabled). |
|
|
HOTKEY | Enables / Disables the Hotkey Command function. If the hotkey |
COMMAND | combinations conflict with programs running on the computers, you |
MODE | may want to disable hotkey operation by turning Hotkey Command |
| mode Off. The default is ON, which allows hotkey operation of the |
| switch. |
|
|
27