CL1008 / CL1016 User Manual
Hot Plugging
The CL1008 / CL1016 supports hot plugging; components can be removed and added back into the installation by unplugging their cables from the ports without the need to shut the unit down. In order for hot plugging to work properly, however, the procedures described below must be followed:
Hot Plugging KVM Ports
You can add or remove computers by plugging/unplugging them into/from a switch’s KVM ports. In order for the OSD menus to correspond to the change, you must manually reconfigure the OSD to reflect the new port information. See F3: SET, page 26, and F4: ADM, page 28, for details.
Note: If the computer's operating system does not support hot plugging, this function may not work properly.
20