
CM1164
Station
The Station command allows you to switch the console focus to the next station in a daisy chain setup. Use the Formula - to set Parameters - to create a Command.
Formulas:
Command + Control + Number + [Enter]
Parameters:
CommandDescription
station | Station Command |
ControlDescription
id | Station ID |
NumberDescription
xStation number of switch in daisy chain, x= 1~4
EnterDescription
Enter | Enter and send out command |
Station Commands
An available formula for the Station command is as follows:
1. Command + Control + Number + [Enter]
For example, to switch the console to station 2 of a daisy chain, type the following:
station id2 [Enter]
Note: Each command string can be separated with a space.
24