
CM1164
DCC Control
The DCC Control command allows you to set the DCC Control mode. Use the Formula - to set Parameters - to create a Command.
Formulas:
Command + Control + [Enter]
Parameters:
Command | Description |
|
|
dcc | DCC Control Command |
|
|
|
|
Control | Description |
|
|
clone | Sets the default DCC clone mode |
|
|
off | Disables DCC function |
|
|
on | Enables DCC function |
|
|
|
|
Enter | Description |
|
|
Enter | Enter and send out command |
|
|
DCC Control Commands
Some available formulas for DCC Control commands are as follows: 1. Command + Control + [Enter]
For example, to set the default DCC clone mode, type the following: dcc clone [Enter]
2. Command + Control + [Enter]
For example, to enable DCC control, type the following: dcc on [Enter]
Note: Each command string can be separated with a space.
25