CM1164
PiP Mode
The PiP Mode command allows you to change the Picture in Picture display mode settings. Use the Formula - to set Parameters - to create a Command.
Formulas:
PiP Channel/Port Setting:
Command + Control1 + Control2 + Control3 + Control4 + Control5 + [Enter]
PiP Configuration Setting:
Command + Config1 + Config2 + Config3 + Config4 + Config5 + [Enter]
PiP Setting Execute:
Command + Execute + [Enter]
PiP Advance Setting:
Command + Control1 + Control2 + Config1 + Config2 + Execute + [Enter]
Parameters:
Command | Description |
|
|
pip2 | Picture in Picture Dual Mode |
|
|
pip3 | Picture in Picture Triple Mode |
|
|
pip4 | Picture in Picture Quad Mode |
|
|
Control | Description |
|
|
cxpy | c: Output channel, x= 1~4 |
| p: Input port, y= 1~4 |
| Example: c2p4 |
|
|
Config | Description |
|
|
cxscanon | Enable channel scan under PiP3 or PiP2 |
| mode, x= 2~3 (Channel ID) |
| Example: c2scanon |
|
|
cxscanoff | Disable channel scan under PiP3 mode, x= |
| 2~3 (Channel ID) |
| Example: c2scanoff |
|
|
cxalphaon | Enable channel alpha mode, x= 2~4 |
| (Channel ID) |
| Example: c3alphaon |
|
|
10