|
| CM1164 | ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Config | Description |
| |
|
|
|
|
|
| cxalphaoff | Disable channel alpha mode, x= 2~4 | ||
|
| (Channel ID) | ||
|
| Example: c3alphaoff | ||
|
|
|
|
|
| cxsy | Change the channel size | ||
|
| c: Change channel, x= 2~4 (Channel ID), | ||
|
| s: Size, pip3~4: y= 1~3(size), | ||
|
| pip2: y= 1~4(size) | ||
|
| Example: c2s1 | ||
|
|
|
|
|
| pbpon | Enable pbp mode | ||
|
|
|
|
|
| pbpoff | Disable pbp mode | ||
|
|
|
|
|
|
|
|
|
|
| Execute | Description |
|
|
|
|
|
| |
| save | Save setting to KVM switch | ||
|
|
|
| |
| default | Reset settings to default | ||
|
| Example: pip2= c1p1 c2p2 | ||
|
| Example: pip3= c1p1 c2p2 c3p3 | ||
|
| Example: pip4= c1p1 c2p2 c3p3 c4p4 | ||
|
|
|
|
|
|
|
|
|
|
| Enter | Description |
| |
|
|
|
| |
| Enter | Enter and send out command | ||
|
|
|
|
|
Some available formulas for PiP Mode commands are as follows:
1. Command + Config1 + Config2 + Config3 + Config4 + Config5 + [Enter]
For example, to set Picture in Picture Dual Mode on Output Channel 1 to Input Port 1, type the following:
pip2 c1p1 [Enter]2. Command + Config1 + [Enter]
For example, to Enable Channel Scan for Picture in Picture Triple Mode, type the following:
pip3 c2scanon [Enter]Note: 1. Each command string can be separated with a space.
2.The Port Number command string can be skipped, and the default value will be used.
11