GOTO allows you to switch directly to a port either by keying in the port's Name, or its Port ID.
To use the Name method, key in 1; key in the port's Name; then press [Enter].
To use the Port ID method, key in 2; key in the Port ID; then press [Enter].
Note: You can key in a partial Name or Port ID. In that case, the screen will show all the computers that the user has View rights to (see SET ACCESSIBLE PORTS, page 31), that match the Name or Port ID pattern, regardless of the current List settings (see F2 LIST, for details).
To return to the OSD Main Screen without making a choice, press [Esc].
F2 LISTThe LIST function lets you broaden or narrow the scope of which ports the OSD displays (lists) on the Main Screen.
Many of the OSD functions only operate on the computers that have been selected for listing on the Main Screen with this function. The choices and their meanings are given in the table below:
Choice | Meaning |
|
|
ALL | Lists all of the ports on the installation. |
|
|
QUICK VIEW* | Lists only the ports that have been selected as Quick View Ports |
| |
|
|
POWERED ON | Lists only the ports that have their attached computers Powered |
| On. |
|
|
QUICK VIEW + | Lists only the ports that have been selected as Quick View Ports |
POWERED ON* | (see SET QUICK VIEW PORTS, page 31), and that have their |
| attached computers Powered On. |
|
|
*These items only show up on the administrator's screen, since only he has Quick View setting rights (see SET QUICK VIEW PORTS, page 31, for details).
Move the Highlight Bar to the choice you want, then press [Enter]. An icon appears before the choice to indicate that it is the currently selected one.
After you make your choice and press [Enter], you return to the OSD Main Screen with the newly formulated List displayed.
26