CS-1754 / CS-1758 User Manual

Platform Setup

The CS-1754 / CS-1758's default port settings are for a PC Compatible operating platform. You can modify the platform setting for each port by bringing the KVM focus to the port you want to change and using the hotkey combinations shown in the table below.

Key

Operation

 

 

[F1]

Sets the PC Compatible keyboard operating platform for the port that

 

currently has the KVM focus.

 

 

[F2]

Sets the Mac keyboard operating platform for the port that currently has

 

the KVM focus.

 

 

[F3]

Sets the Sun keyboard operating platform for the port that currently has

 

the KVM focus.

 

 

[R] [Enter]

Reset everything to the default settings.

 

 

The Hotkey entry method is as follows:

1.Invoke HKM (see Invoking Hotkey Mode (HKM), page 35)

2.Press and release the appropriate Function key (see table). After completing a setting, you automatically exit HKM.

Note: The brackets indicate the keys you should press. Simply press the indicated keys - do not type the brackets.

Miscellaneous Actions

Hotkeys are also used to reset the USB, and toggle the beeper On and Off. To perform any of these operations, do the following:

1.Invoke HKM (see Invoking Hotkey Mode (HKM), page 35)

2.Press and release the appropriate action key (see table).

Key

Operation

 

 

[F5]

Performs a USB reset

BToggles the Beeper On or Off. The Command Line displays Beeper On or Beeper Off for one second; then the message disappears and you automatically exit HKM.

After completing a setting, you automatically exit HKM.

38