4. OSD Operation

F3 SET

This function allows the administrator and each user to set up their own working environment. A separate profile for each is stored by the OSD and is activated according to the Username that was provided during Login. To change a setting:

1.Double click it; or move the highlight bar to it, then press [Enter].

2.After you select an item, a submenu with further choices appears. To make a selection, either double click it; or move the Highlight Bar to it, then press [Enter]. An icon appears before the selected choice to indicate which one it is. The settings are explained in the following table:

Setting

Function

 

 

OSD HOTKEY

Selects which Hotkey activates the OSD function:

 

[Scroll Lock] [Scroll Lock] or [Ctrl] [Ctrl].

 

Since the Ctrl key combination may conflict with programs running

 

on the computers, the default is the Scroll Lock combination.

 

 

PORT ID

Allows you to position where the Port ID appears on the screen.

DISPLAY

The default is the upper right corner, but you can choose to have it

POSITION

appear anywhere on the screen.

 

Use the Mouse or the Arrow Keys plus Pg Up, Pg Dn, Home, End,

 

and 5 (on the numeric keypad with Num Lock off), to position the

 

Port ID display, then double click or press [Enter] to lock the

 

position and return to the Set submenu.

 

Note: The ID display position for each port is set independently;

 

the choice specified here only applies to the currently selected port.

 

 

PORT ID

Determines how long a Port ID displays on the monitor after a port

DISPLAY

change has taken place. The choices are:

DURATION

User Defined - which lets you select the amount of time (from 1 -

 

 

255 sec.);

 

Always On - which displays the Port ID at all times.

 

If you select User Defined, key in the number of seconds, then

 

press [Enter]. The default is 3 Seconds. A setting of 0 (zero)

 

disables this function.

 

 

(Continues on next page.)

27