ATEN Technology KL3116M manual 17

Chapter 1. Introduction

Keyboard Module

12

1311

14 10

9

15

No.	Component	Description
9	Lock LEDs &	The Num Lock, Caps Lock, Scroll Lock LEDs are located
	Reset Switch	here.
		A Reset Switch is located to the right of the Lock LEDs. Press
		this recessed switch in with a small object to perform a
		system reset.
10	Station Selection	Š The LED displays the station number that has KVM focus.
	Area	Š The left button shifts the KVM focus down the chain
		(Station 2 → Station 1, etc.). After Station 1, it cycles back
		to the last station.
		Š The right button shifts the KVM focus up the chain. After
		the last station, it cycles to Station 1.
11	Port Selection	Š The LED displays the port number that has KVM focus.
	Area	Š The left button shifts the KVM port focus down (3 → 2,
		2 → 1, etc.). After Port 1, it cycles back to the last port.
		Š The right button shifts the KVM port focus up (2 → 3,
		3 → 4, etc.). After the last port, it cycles to Port 1.
12	Port LEDs	An On Line LED lights to indicate that the computer attached
		to its corresponding port is up and running.
13	Keyboard	These catches (one on each side) release the keyboard/
	Release Catch	touchpad module so you can slide it away.
14	Keyboard	Standard 105-key keyboard
15	Touchpad	Standard mouse touchpad

7