Chapter 4. OSD Operation

Setting

Function

 

 

SCAN–SKIP

Selects which computers will be accessed under skip mode (see

MODE

F5: SKP, page 43), and Auto Scan mode (see F7: SCAN, page 45.

 

Choices are:

 

ALL - All the ports which have been set accessible (see SET

 

ACCESSIBLE PORTS, page 40);

 

QUICK VIEW - Only those ports which have been set accessible

 

and have been selected as quick view ports (see SET QUICK

 

VIEW PORTS, page 41);

 

POWERED ON - Only those ports which have been set accessible

 

and are powered on;

 

QUICK VIEW + POWERED ON - Only those ports which have

 

been set accessible and have been selected as quick view ports

 

and are powered on. The default is ALL.

 

Note: The quick view choices only show up on the administrator's

 

screen, since only he has Quick View setting rights (see SET

 

QUICK VIEW PORTS, page 41 for details).

 

 

SCREEN

If there is no input from the console for the amount of time set with

BLANKER

this function, the screen is blanked. Key in a value from 1–30

 

minutes, then press [Enter]. The default setting of 0 disables this

 

function.

 

 

HOTKEY

Enables / disables the hotkey command function in case a conflict

COMMAND

occurs with programs running on the computers.

MODE

 

 

 

HOTKEY

Sets the keyboard shortcut for invoking Hotkey Mode (see

 

page 47). Choices are: [NUM LOCK] + [-](minus) (default), and

 

[CTRL] + [F12].

OSD

Sets the language used in the OSD. Choices are: English,

LANGUAGE

German, Japanese, Simplified Chinese and Traditional Chinese.

 

 

TOUCHPAD

Enables / disables the touchpad.

 

 

OSD

Note: This function is available on the KL3116T only.

CALIBRATION

Calibrates the touchscreen for use with the OSD. To calibrate the

 

touchscreen:

 

1. Touch the yellow cursor in the upper left corner of the OSD as

 

instructed on-screen.

 

2. Touch the yellow cursor again in the lower right corner of the

 

OSD as instructed on-screen.

 

 

 

(Continues on next page.)

37