Chapter 5. Hotkey Operation

Port OS Configuration

A port’s operating system can be changed to match the operating system of an attached computer. To change a port’s operating system, key in the following hotkey combination:

1.Invoke hotkey mode (see page 48).

2.Key in [Function], where [Function] refers to one of the function keys in the following table:

Function Key

Description

F1

Sets the Port OS to Windows

 

 

F2

Sets the Port OS to Mac

 

 

F3

Sets the Port OS to Sun

 

 

After pressing a function key you automatically exit Hotkey mode.

Restore Default Values

This administrator only hotkey restores the KL3116 / KL3116T default values. See RESTORE DEFAULT VALUES, page 41. To restore the default values, key in the following hotkey combination:

1.Invoke hotkey mode (see page 48).

2.Press [R].

3.Press [Enter].

After you press [Enter], the command line displays RESET TO DEFAULT SETTING for three seconds; then the message disappears and you automatically exit Hotkey mode.

53