KL3116 / KL3116T User Manual

F4: ADM

F4 is an administrator only function. It allows the administrator to configure and control the overall operation of the OSD. To change a setting, double click it; or use the up and down arrow keys to move the highlight bar to it then press [Enter].

After you select an item, a submenu with further choices appears. Double click an item, or move the highlight bar to it then press [Enter]. An icon appears before the selected item to indicate which one it is. The settings are explained in the following table:

Setting

Function

 

 

SET USER

Use this function to set usernames, passwords and fingerprints for

LOGIN

the administrator and users.

 

Š Usernames and passwords for one administrator and four users

 

can be set.

 

Š After you select the administrator field or one of the user fields, a

 

screen that allows you to key in the username and password

 

appears. Usernames and passwords can be from 1 to 16

 

characters long and can consist of any combination of letters

 

and numbers (A–Z, 0–9) and some additional keys (* ( ) + : - , ? .

 

/ space).

 

Š For each individual, key in the username and password, confirm

 

the password, then press [Enter].

 

Š To modify or delete a previous username and/or password, use

 

the backspace key to erase individual letters or numbers. Press

 

[Enter] when done.

 

Š Usernames and passwords are not case sensitive. Usernames

 

are displayed in capital letters in the OSD.

 

 

SET

This function allows the administrator to define user access to the

ACCESSIBLE

computers on the installation on a port-by-port basis. For each

PORTS

user, select the target port; then press the [Spacebar] to cycle

 

through the choices: F (full access), V (view only), or blank. Repeat

 

until all access rights have been set, then press [Enter]. The

 

default is F for all users on all ports.

 

Š A blank setting means that no access rights are granted. The

 

port will not show up on the user's LIST on the main screen.

 

Š The administrator always has full access to all ports.

 

 

SET LOGOUT

If there is no input from the console for the amount of time set with

TIMEOUT

this function, the user is automatically logged out. A login is

 

necessary before the console can be used again.

 

This enables other users to gain access to the computers when the

 

original user is no longer accessing them, but has forgotten to log

 

out. To set the timeout value, key in a number from 1–180 minutes,

 

then press [Enter]. The default setting of 0 disables this function.

 

 

 

(Continues on next page.)

40