KL3116 / KL3116T User Manual
LCD Module
16 |
|
17 |
|
18 |
|
19 |
|
20 | 21 |
|
No. | Component | Description |
|
|
|
16 | LCD Display | After sliding the LCD module out, flip up the cover to access |
|
| the LCD monitor. |
|
|
|
17 | KVM OSD Button | As an alternative to using the OSD hotkey, press this button |
|
| to access the OSD when viewing a port. |
|
| Note: This button is available on the KL3116T model only. |
|
|
|
18 | LCD OSD | Buttons to control the position and picture settings of the |
| Controls | LCD display are located here. See page 25 for details. |
|
|
|
19 | LCD Power | Press this button to turn the LCD monitor on and off. When |
| Button | the LCD monitor is off, this button illuminates; when the LCD |
|
| monitor is on, this button does not illuminate. (This function |
|
| only affects the monitor, not the KVM switch itself.) |
|
|
|
20 | USB Port | The USB port is available to connect a USB 1.1 peripheral |
|
| device (flash drive, |
|
|
|
21 | Firmware | Firmware Upgrade Port: The Firmware Upgrade Cable that |
| Upgrade Section | transfers the firmware upgrade data from the administrator's |
|
| computer to the KL3116 / KL3116T plugs into this |
|
| connector. |
Firmware Upgrade Switch: During normal operation this switch should be in the NORMAL position. (See page 57 for firmware upgrading details.)
8