Appendix
Note: We strongly recommend that you close the KL9108 / KL9116 LCD console before continuing (see Closing the Console, page 25.) Using the LCD monitor to view computers that are set to resolutions that exceed its maximum capability can damage it and shorten its life span.
To access computers from the local console when the integrated console is closed, simply connect an external KVM console with a monitor that supports 1600 x 1200 @ 60 Hz to the KL9108 / KL9116’s external console ports.
1.From a remote computer, log into the KL9108 / KL9116 and access the computer whose screen resolution you wish to change.
2.Open the computer’s Control Panel and
3.Click the Settings tab, and then click Advanced.
4.In the dialog box that appears, click the Monitor tab.
5.Under Monitor settings, click to clear the Hide modes that this monitor cannot display check box.
6.Click Apply.
7.Click the Adapter tab, and then click List All Modes. The List All Modes dialog box appears.
8.Under List of valid modes, select the display mode that you want the computer to use.
Note: The maximum screen resolution and refresh rate that the KL9108 / KL9116 supports for remote computers is 1600 x 1200@60 Hz.
9.Click OK, and then click Apply. The display mode changes to the one you selected.
10.If the Monitor Settings dialog box appears requesting you to confirm the settings change, click Yes.
11.After the Monitor Settings dialog box closes, click OK.
12.In the Display Properties dialog box, click OK.
This completes the procedure. Repeat these steps for any other computer whose screen resolution you wish to change.
157