1. Firmware Upgrade Recovery Switch
During normal operation and while performing a fimware upgrade, this switch should be in the NORMAL position. See p. 61 for firmware upgrade recovery details.
After returning the switch to its prior firmware state, slide the switch back to the NORMAL position to attempt the firmware upgrade again, or to use the switch with its prior firmware.
2. Port LEDs
The Port LEDs are multicolored (Red / Green / Amber), and provide status information about their corresponding CPU Ports as follows:
Color | Condition | Indication |
Amber | Steady | Port is selected; connected computer is On |
|
|
|
| Flashing | Port is selected; port is cascaded to a powered |
|
| on KVM switch |
|
|
|
Red | Steady | Port is selected; connected computer is Off |
|
|
|
Green | Steady | Port is not selected; connected computer is On |
|
|
|
| Flashing | Port is not selected; port is cascaded to a |
|
| powered on KVM switch |
|
|
|
Off |
| Port is not selected; connected computer is Off |
|
|
|
3. Reset Switch
Pressing this switch in performs a System Reset.
Note: This switch is
4. Power LED
Lights to indicate that the KM0216 / KM0432 is powered up and ready to go.
6