(F4 ADM: continued)
Setting | Function |
SET KEYBOARD | This function allows the Administrator to define the keyboard language |
LANGUAGE | layout for each port. To assign a keyboard language, select the target |
| port; then press the [Spacebar] to cycle through the choices: US |
| English; Japanese; or French. The default is US English. |
|
|
SET | This function allows the Administrator to define the operating platform |
OPERATING | for the computer connected to each port. To assign an operating |
PLATFORM | platform, select the target port; then press the [Spacebar] to cycle |
| through the choices: Windows (PC compatible); Mac; and Sun. The |
| default is Windows (PC compatible). |
|
|
BUS | This function allows the Super Administrator to authorize Operator |
AUTHORIZATION | access to Stations on the installation other than the ones connected |
| to the Station the Operator is logged in on. |
| For each Operator, press the [Spacebar] to cycle through the |
| choices: F (Full access), V (View Only), or blank (No access). |
| Repeat until all access rights have been set, then press [Enter]. |
| The default is blank - No Operators have access rights to other |
| Stations (and the computers connected to them). |
|
|
FIRMWARE | In order to upgrade the KM0216 / KM0432’s firmware (see Chapter |
UPGRADE | 6), you must first invoke Firmware Upgrade Mode with this setting. |
| Only the Super Administrator on the Master Station can utilize this |
| function. |
|
|
45