Console Modules
The purpose of the Console Modules is to provide flexibility for your installation by allowing PS/2 and USB interfaces to be mixed and matched at the console side. At the same time, KVM Adapter cables allow PS/2, USB and Sun interfaces to be mixed and matched at the computer side. With this approach, either type of console can access and control any type of computer. The Console Modules currently available are shown in the table below:
Module | Type |
KA9220 | For PS/2 consoles |
|
|
KA9270 | For all USB consoles (including Mac |
| and Sun) |
|
|
Console Modules Front View
1 2
Although, the KA9270 Module is shown in the diagram, the front panel configuration of the KA9220 module is the same. They consist of two LEDs: Link and Power.
MLink lights to indicate that the module is connected to the KM0216 or KM0432.
MPower lights to indicate that the module is turned On and receiving power.
10 