F3 SET:
This function allows each operator to set up his own working environment. A separate profile for each is stored by the OSD and is activated according to the Username that is provided during Login.
To change a setting:
1.Double Click it; or move the highlight bar to it, then press [Enter].
2.After you select an item, a submenu with further choices appears. To make a selection, either Double Click it; or move the Highlight Bar to it, then press [Enter]. An icon appears before the selected choice to indicate which one it is.
Note: All your setting changes are stored in temporary memory and remain in effect for the duration of your session. The changes only become permanent when you Log out of the OSD (see p. 49). If you shut down the KM0216 / KM0432 without first logging out, your changes are discarded.
The settings are explained in the following table:
Setting | Function |
OSD HOTKEY | Selects which Hotkey activates the OSD function: |
| [Scroll Lock] [Scroll Lock] or [Ctrl] [Ctrl]. |
| Since the Ctrl key combination may conflict with programs running |
| on the computers, the default is the Scroll Lock combination. |
|
|
PORT ID | Allows you to position where the Port ID appears on the monitor. |
DISPLAY | The default is the upper left corner, but you can have it appear |
POSITION | anywhere on the screen. |
| Use the Mouse or the Arrow Keys plus Pg Up, Pg Dn, Home, End, |
| and 5 (on the numeric keypad with Num Lock off), to position the |
| Port ID display, then Double Click or press [Enter] to lock the |
| position and return to the Set submenu. |
|
|
(Table continues on next page)
40 