Toshiba RAS-10SA-E, RAS-10SKX Others, Gas Leak Test, Test Operation, Auto Restart Setting

8-6. Others

8-6-1. Gas Leak Test

Flare nut connections (indoor unit)

	C
	D
Electric parts
cover
Flare nut	Valve stem cap
	connection
connections
(Outdoor unit)	A
	B
	Service cap
	Valve stem cap connection
	connection

Fig. 8-6-1

•Check the flare nut connections, valve stem cap connections and service cap connections for gas leak with a leak detector or soap water.

8-6-2. Test Operation

To switch the TEST RUN (COOL) mode, press TEMPORARY button for 10 sec. (The beeper will make a short beep.)

8-6-3. Auto Restart Setting

This product is designed so that, after a power failure, it can restart automatically in the same operating mode as before the power failure.

Information

The product was shipped with Auto Restart function in the off position. Turn it on as required.

<How to set the Auto Restart>

•Press and hold down the TEMPORARY button for about 3 seconds. After 3 seconds, the electronic beeper makes three short beeps to tell you the Auto Restart has been selected.

•To cancel the Auto Restart, follow the steps described in the section Auto Restart Function of the Owner's Manual.

TEMPORARY button

TEMPORARY

Fig. 8-6-2

– 31 –