Toshiba RAS-10SKX, RAS-10SK-E service manual Outdoor Unit RAS-10SA-E, RAS-10SAX

10-3. Outdoor Unit (RAS-10SA-E, RAS-10SAX)

No.	Part name		Procedure	Remarks
• Common		1)	Stop the operation of air-conditioner, and disconnect
	procedure		the power cord from the AC supply.
		2)	Remove E-parts cover.
			(1- ST1T ø4 x 10 )
		3) Remove the cord clamp (2- ST2T ø4 x 12		) and
			remove the connecting cable.

4)Remove the front cabinet. (7- ST1T ø4 x 10 with nylon washer)

•Pull the front lower portion toward you, and remove it pulling out upward.

‚ Capacitor for	1) Remove the fixing screw securing the capacitor		Refer to [Electrical parts list and
compressor		band.	location] in page 55.
		(1- ST2T ø4 x 8 )
	2)	Remove the cable connected to the terminal.
ƒ Capacitor for fan	1) Remove the fixing screw.		Same as above.
motor		(1- ST2T ø4 x 8 )
	2)	Remove the cable connected to the terminal.
„ Overload relay	1) Perform the process • above.
	2) Remove terminal cover of compressor.
	3)	Remove OL holder and pull OL relay up.
	4)	Remove Fustons of leads.

– 51 –