Toshiba RAS-10SA-E, RAS-10SKX, RAS-10SAX UK Plugs and Sockets etc Safety Regulations, SI Number

Models: RAS-10SA-E RAS-10SK-E RAS-10SAX RAS-10SKX

1 56
Download 56 pages 48.55 Kb
Page 19
Image 19
UK Plugs and Sockets etc (Safety) Regulations 1994

CAUTION

Exposure of unit or water or other moisture before installation will result in an electrical short. Do not store in a wet basement or expose to rain or water.

After unpacking the unit, examine it carefully for possible damage.

Do not install in a place that can increase the vibration of the unit. Do not install in a place that can amplify the noise level of the unit or where noise and discharged air might disturb user’s neighbors.

To avoid personal injury, be careful when handling parts with sharp edges.

Please read the installation manual carefully before installing the unit. It contains further important instructions for proper installation.

UK Plugs and Sockets etc (Safety) Regulations 1994

SI Number 1768

With regard to Schedule 3, Item 7 of the above UK Regulations, this appliance must be permanently connected to the fixed wiring of the main electrical supply by means other than the use of an approved 13 Amp plug-top as outlined in the Regulations.

Electrical work must be carried by suitably qualified persons and in accordance with all relevant safety standards and codes of practice.

We recommend that the power supply for this appliance is derived from a suitably protected dedicated circuit.

(for U.K. only)

– 19 –

Page 19
Image 19
Toshiba RAS-10SA-E, RAS-10SKX, RAS-10SAX, RAS-10SK-E service manual UK Plugs and Sockets etc Safety Regulations, SI Number