Fujitsu fi-4340C manual Setting IPC pre-set mode

3 Setting IPC pre-set mode

When you set the use =!of the0NoIPC3pre-setIPmode,Cyou mustPrseteit as-follows:Set

1. Press “Next” or “Previous” and let the scanner display Screen 4. Screen 4

2. At Screen 43, press!0or3Pres-to select1 theUeprest-Settinge?andYIpressPCes/Nto activateo the pre-setting. Then the scanner displays Screen 5.

Screen 5

NOTICES

The following IPC pre-settings can be selected when IPC-4D is installed:

Preset 1: Captures texts printed on the colored background

Preset 2: Produces an image with good contrast

Preset 3: OCR Smoothing

Preset 4: Image Smoothing

Preset 5: Dither

Preset 9:Pre-printed paper (color) orientation

Preset 10:No-carbon paper orientation

The following built-in IPC pre-settings can be selected even though IPC-4D is not installed:

•Sharpen

•Darken Character

•Copy Quality

3.At Screen 5, select “Yes” or “No”. Note that when you select “Yes”, the IPC setting from the Host computer is ignored. If you select “No”, the IPC setting will be changed according to the host setting.

Finally press .

NOTICE

When you select the Copy Quality, select the scanner and printer settings carefully to get the best quality.

●7-7