NOTICE
The SCSI terminator switch is set to ON before shipment from the factory. When the image scanner is located in the middle of a SCSI daisy chain, change the terminator setting to OFF.
When the image scanner is located at the end the daisy chain, set the terminatorStackerto ON.
■Mounting the Stacker
1.Press in the bottom of the pins on both sides of the stacker with your fingertips, and insert the stacker pins until they slot into the holes on the image scanner.
■Connecting the power cable
1. Connect the power cable to the power inlet of the device andforaNorthpowerAmericaoutlet. | Poweroutlet | |
Powerinlet | Powercable | forEurope |
|
| |
●
