Fujitsu fi-4340C manual Basic Product Specification, SCSI-2 SE

Basic Product Specification

1	Scanner Type		ADF (Duplex), Document bed
2	Image sensor		CCD x 2	Front/Back
3	Light source		White Xenon fluorescent tube x 2	Front/Back
4	Document	Minimum	A8 (Portrait)
	Size
		Maximum	A4/Letter/Legal
5	Paper Weight		52 g/m2 (14 lb) to 127 g/m2 (34 lb)	Note (*1)
6	Scanning	Mono-	40 pages/min simplex, 80 sides/min duplex	Note (*3)
	Speed	chrome	(@200dpi)
	Note (*2)
		Color	34 pages/min simplex, 48 sides/min duplex
			(@150dpi)
7	ADF Capacity		100 sheets (A4, 64 g/m2 (20 lb))	Note (*3)
8	Optical Resolution		600 dpi
9	Output Res-	Binary	50 - 800 dpi	Standard gradient
	olution			is 1 dpi, (multiples
	Note (*4)			are possible)
		Grayscale	50 - 600 dpi	Standard gradient
				is 1 dpi, (multiples
				are possible)
		Color	50 - 600 dpi	Standard gradient
				is 1 dpi, (multiples
				are possible)
10	Grayscale level (internal)		1024 levels (10 bits)
11	Halftone Patterns		Dither/Error diffusion
12	Other function		JPEG compression	Note (*5)
13	Interface		SCSI-2 (SE)	Shield-type 50 pin
	Note (*6)			(pin-type) half-
				pitch
			Third Party Slot	Note (*7)

NOTES

*1: The details are described in Chapter5 "ADF DOCUMENT SPECIFICATION".

*2 ) The scanning speeds given are the maximum mechanical scanning speeds. During actual scanning some extra time will be required for data transfer and software processing.

*3 ) The maximum number will differ due to the paper thickness. Refer to Chapter5 "ADF DOCUMENT SPECIFICATION".

*4 ) Maximum output resolution may vary according to the scan size, and setting (simplex/duplex)

*5 ) fi-475CMP3 (JPEG compression board) must be installed.

*6 ) Both SCSI-2 and the Third Party Slot can not be used at the same time.

*7 ) The Power consumption of the boards should be as follows:

-In the Low Power Mode : Less than 0.35 A

-Without IPC-4D(IMAGE PROCESSING CIRCUIT BOARD) : Less than 1.5 A

-With IPC-4D(IMGGE PROCESSING CIRCUIT BOARD) : Less than 3.0 A

●10-2