2.At Screen 32, press! 1or7-to select1 “YesDeNandfopress/a Yule . Thenst ?the scanner displays Screen 33. Screen 33

3.At Screen 33, selectT! 17oYesp=to-return2the0settingsAmDmFto the factoryT opdefault or select “No” to make new

settings (as shown below). Then press . The scanner displays Screen 34. Screen 34

4.At Screen 34, pressB! 1torm7=-to change3 0 theAmtopDmsettingF( +. The:B Uovaluep)tchangest o inm1 mm units. Then press

to activate the setting. The scanner displays Screen 35. Screen 35

5.At Screen 35, press! 1or7-to change4 Athe DbottomFsettingLeft. With (+:Up), the area is set upward from the bottom edge ofLtheefimaget=. With (–:Down),0mthemarea is set downward from the bottom edge of the

image. The value changes in 1 mm units. Then press to activate the setting. The scanner displays Screen 36.

Screen 36

6.At Screen 36, pressR! 1ior7g-hto change5t = theAleftD0settingFmm. TheRvaluei ghchangest in 1 mm units. Then press

to activate the setting. The scanner displays Screen 37. Screen 37

7.At Screen 37, press or to change the top setting. The value changes in 1 mm units. Then press

to activate the setting. The scanner displays the next setup item.

7-15

Page 79
Image 79
Fujitsu fi-4340C manual