Double Feed Detection Condition

When the double-feed sensor is used, the thickness or the combination of the thickness and the length of the document is subject to the following specifications:

1Thickness: 0.065 mm to 0.15 mm

2Paper length accuracy: 1% or less

3Any black print at the center of the leading edge of the paper is not allowed. (10 mm x 10 mm)

4No binding holes are allowed within 35 mm of the middle (halfway point) along the center of the paper.

5Printing duty: 12 % or less

6The deviation of the amount of transparent light on the base color area should be less than 10 %.

detectionNo. printingallowed

35mm

10mm

NOTICE

 

 

Certain paper types or certain condition of paper result in lower detection rates in terms of double feed

CenterofPaper

Feedingdirection

Nobindingholesallowed

5-8

Page 56
Image 56
Fujitsu fi-4340C manual 35mm, Double Feed Detection Condition