Fujitsu fi-4340C manual Screen! 1I 25 P0C-I 4PCD, IPC Status Display

5.At Screen 17,Screen 18 or Screen 19, press to increase the offset or press to decrease the

offset. Then press to activate the setting. The scanner displays the next item of the setup mode.

10 IPC Status Display

This function allows you to check whether or not the IPC-4D(IMAGE PROCESSING CIRCUIT BOARD) is installed, and whether or not fi-CMP3(JPEG COMPRESSION BOARD) is installed, and whether or not fi-434PR(IMPRINTER) is installed.

1.Press “Next” or!“Previous1I P0C” -I. 4PCD

if an IPC4D(IMAGE PROCESSING CIR UIT BOARD) is installed, Screen 20 will appear.

Screen 20

if an IPC4D(IMAGE!PROCESSING10 INCIROPCUIT BOARD) is not installed,Screen 21 will appear. Screen 21

if a fi-434PR(IMPRINTER)!10only isINinstalled,OPCScreen 22OKPwillRTappear. Screen 22

if fi-434PR(IMPRINTER)! 1I 0PandCIPC4D(IMAGE-IP4CDPROCESSINGPROKTCIRCUIT BOARD) are installed, Screen 23 will appear.

Screen 23

if a fi-CMP3(JPEG!COMPRESSION10 INOPBOARD)C only isOJinstalled,KPEScreenG 24 will appear. Screen 24Check whether or not the respectively option is installed as follows.

if IPC4D(IMAGE PROCESSING CIRCUIT BOARD) and fi-CMP3(JPEG COMPRESSION BOARD) are installed,Screen 25 will appear.

Screen! 1I25 P0C-I 4PCD JOKPEG

●7-11