Fujitsu fi-4340C Screen M1ManRe a du ay l, e ad, XXXXX0XX, ecte, Manual Feed Mode Setting, deea

Manual Feed Mode Setting

In this mode, the scanner waits for some predetermined time before issuing a “Paper Empty” message after all documents are read. This predetermined time (time-out limit) is specified in the Setup mode.

Therefore, you can set the next documents on the ADF paper chute without interrupting the reading

operation.		Screen M1R	e ad		y			XXXXX0XX>
The procedures for setting the manual feed mode are as follows:
1.	Turn the power On and verify that “Scanner Ready” is displayed on the LCD.
2.	Press	ScreenMM2oR	deea	d	Si	en	lg	e	Mc to	d	e0
		then the scanner displays Scre				n M2.
			dean	u	Sa	el	l	eF	ecte	d	?1
.	Press	ScreenMMM3oM
3.		then the scanner displays Scre				n M3
4.	Press	ScreenM01=M4N	o/M	Ya	ne	us	a	l	F	e	ed
		then the scanner displays Screen M4.

5.Select “Yes” by pressing . Then press .

6.Press to return to the “Sca ner Ready” screen. Note that “Manual Feed” is shown on the LCD. This means that the scanner is in Manual Feed mode.

Screen M1ManRe a du ay l XXXXX0X X>

●4-4