■Button and LED
Name of the button and | Function | ||
| LED |
| |
|
|
|
|
Button |
| Next | Displays the next LCD screen. |
|
|
|
|
|
| Previous | Displays the previous LCD screen. |
|
|
|
|
|
|
| Moves the cursor to the left. |
|
|
|
|
|
|
| Moves the cursor to the right. |
|
|
|
|
|
| Exit | When you are entering settings on the Operator panel, pressing this |
|
|
| button returns you immediately to the Scanner Ready screen. |
|
|
|
|
|
| Enter | Enters the parameter currently selected by the cursor. |
|
|
|
|
|
| Send To/ | Operational only when Manual start mode is set or the Read lamp |
|
| Start | lights; Starts the reading when video interface option is used. Some |
|
|
| application software packages make use of this button. |
|
|
|
|
|
| Stop | When the Check LED lights, pressing this button releases the error |
|
|
| status (turns off Check and returns to the Scanner Ready screen). |
|
|
| Operational only during the reading operation; stops the reading |
|
|
| when the video interface option is used. |
|
|
| Also turns off the Check lamp. |
|
|
|
|
LED |
|
| Indicates that the scanner is On. |
|
|
|
|
|
| Read | Indicates the scanner is reading or ready to read. |
|
|
|
|
|
| Check | If lit, this indicates that an alarm occurred. Pressing the Stop button |
|
|
| turns the Check lamp Off. |
|
|
| If it blinks at one second intervals, this means that a jam or double |
|
|
| feed has been detected. If the problem is jammed paper, removing |
|
|
| the jammed paper turns off the Check lamp. If the problem is double |
|
|
| feed, pressing the Stop button turns off the Check lamp. |
|
|
| If it blinks at four seconds intervals, this means that cleaning the ADF |
|
|
| is necessary. |
|
|
|
|
●
