Fujitsu fi-4340C manual Description, Selectable, Default, parameters

				(Continued)
No	Item	Description	Selectable	Default
			parameters
14		When the IPC-4D image processing board
		is installed in the third party Slot, select
	IPC mode		Standard/IPC4D	Standard
		this IPC-4D board or the image processing
		circuit built in the scanner.
15			Left/Right:	Left/Right:
			0 to 15 mm	0 mm
		Adjusts the edge areas to be erased from
	ADF Edge Erasing		Top:	Top:
		the image scanned by the automatic	0 to 15 mm	0 mm
		document feeder (ADF).
			Bottom:	Bottom:
			-7 to +7 mm	0 mm
16			Left/Right:	Left/Right:
			0 to 15 mm	0 mm
	FB Edge Erasing	Adjusts the edge areas to be erased from	Top:	Top:
		the image scanned by the flat bed (FB).	0 to 15 mm	0 mm
			Bottom:	Bottom:
			0 to 15 mm	0 mm
17	Select read color	Selects the color to be read in unicolor	R/G/B/W	G
		reading.
18		Switches between quality priority scanning	Normal/
		and speed priority scanning with respect
	Gray mode		Draft/	Normal
		to the default setting when scanning
			Quality
		grayscale images.
19		Displays the remaining amount of ink
		when the Imprinter option is attached and
	Remaining ink		Reset/No	No
		resets the remaining ink counter when
		replacing the ink.
20	Print No.	Selects printing of Nos. when the Imprinter	on/off	off
		option is attached.

*1) Some restrictions apply to the detection of a double feed.

*2) This offset refers to the difference from the value adjusted by automatic offset adjustment.

●7-4