Fujitsu fi-4340C manual 2/ L1/ L2, No/ H1, l ft one, Parameter, Description

10.Select Back Density=(when0N8o“Duplex/ FH” .1wasH/Selected)aHlfton2by/pressingL1/ oreL.2. As the cursor moves to the

right, / may appear Then press . The scanner displays Screen 8. Screen 8

11.Select Front Halftone by pressing or .

Parameter							Description
No			Halftone is Off. Therefore binary reading is specified.
H1			Halftone with dither is specified.
H2			Halftone with error diffusion is specified.
L1 (*)			Automatic separation with dither is specified.
L2 (*)			Automatic separation with error diffusion is specified.
	Screen09		9	B.	H	a	l ft one.
*) This parameter appears only when the IPC-4D(IMAGE PROCESSING CIRCUIT BOARD) is
installed.	=	No/ H1			/	H	2/ L1/ L2
Press	to confirm. The scanner displays Screen 9.

12.Select Back Halftone=10L(wheni “nDuplexFoe”/wasnPspecified)thotDby pressingoc . or . The parameters are the

same as in step 11. Press to confirm. The scanner displays Screen 10. Screen 10

●9-7