Sawgrass Technologies, Inc. | ChromaBlast™ Getting Started Guide for the EPSON Stylus C88 /C88 + |
Troubleshooting
The troubleshooting tips found in this section relate mainly to problems that can be seen in transferred ChromaBlast™ images. If you are having problems related to the performance of your printer, please refer to the Problem Solving section found in the EPSON Stylus C88/C88+/D88+ Printer User’s Guide.
The colors in my transferred image are incorrect
The image may need color adjustment. Use the ChromaBlast Driver™ color matching software. For more information on how to use this software, please see the section entitled ChromaBlast Driver™ User’s Guide.
Ensure you used the right printer driver and driver settings. Please see the section entitled ChromaBlast Driver™ User’s Guide.
Ensure you pressed the item with the proper time, temperature, and pressure. For guidelines see the section entitled Printing and Heat Transfer Instructions.
Verify all colors print correctly. Run the Nozzle Check utility and clean the print heads as required.
My printout gets cut off on the bottom or side
Verify the printer driver is setup for the correct paper size. Your printer driver setting needs to match the media size that is loaded in your printer.
Ensure the right paper guide is in the proper position on the printer. When setting up the printer, slide the right paper guide to the left until it clicks into position.
51
